Products
- Analyzers
- Automation Systems
- Butter Equipment
- Centrifuges
- Cleaning-in-Place Systems
- Deareators
- Draught Regulators
- Evaporators
- Fat Crystalization Equipment
- Filters & Strainers
- Fluid Bed Dryers
- Heat Exchangers
- Homogenizers
- Membrane Filtration Systems
- Microparticulation Systems
- Mixers & Agitators
- Pasturization Systems
- Pigging Systems
- Plumbing Products
- Pumps
- Recreational Marine Products
- Recreational Marine Pumps
- Spin Flash Dryers
- Spray Dryers
- UHT Systems
- Valves
- Adhesives & Sealants
- Automotive Heating System
- Baby Food
- Bakery Filing Cream
- Beer, Cider, Wine & Spirits
- Biodiesel
- Boats & Watercraft
- Building Infrastructure
- Butter & Spreads
- Cement
- Cheese
- Chocolate
- Coffee & Tea
- Condiments, Sauces & Soups
- Cosmetics
- Dairy Powders
- Ethanol
- Flavors & Fragrances
- Fruit Juice
- Fuel Supply System
- Hair, Nail & Skin Care Products
- Ice Cream
- Inorganic Chemicals
- Margarine & Shortening
- Meat & Animal-Based Proteins
- Milk & Cream
- Neutralization
- Nutraceuticals
- Oral Care
- Paints & Coatings
- Petrochemicals
- Pipelines
- Plant-Based Food & Beverages
- Plastic & Resins
- Refinery
- Soft Drinks
- Solvents & Solutions
- Specialty Chemicals
- Synthetic Rubber
- Yogurt
S200 Series - Stainless Steel Centrifugal Pumps
Designed for use in the Bio-Pharmaceutical industry, these pumps are manufactured to ASME BPE specification criteria.
FEATURES
All product contact components are machined from wrought less than 5% ferrite level, 316L SS and feature a 20 Ra product contact surface finish. Material heat numbers are available on all product contact components. Standard Feature and Benefits
- Designed to be Cleanable-in-Place (CIP)
- High efficiency, low NPSHR design for a wide variety of applications.
- One size mechanical seal for all S200 Series models; reducing parts inventory and cost (commercial seals available)
- Integral impeller/shaft design for fewer parts, greater concentricity and easy maintenance
- Close coupled pumps use NEMA JM Frame motors with larger diameter shafts and bearings (compared to C Frame motors)
- Horizontal, vertical and 45掳 angle discharge port orientation available
- Impellers, casing, and backplate are machined from wrought 316L SS
- Stainless steel motor adapters
- Reduced validation time
- Documentation package
- FDA approved fluroelastomers
- USP Class VI elastomers
- 3-A approved and EHEDG certified
Product Specifications
|
Model |
Inlet |
Outlet Size |
Max. |
Max. Capacity GPM (M3/HR) |
Max. Head Feet (Meters) |
||
|---|---|---|---|---|---|---|---|
|
1750 RPM |
3500 RPM |
1750 RPM |
3500 RPM |
||||
|
S2045 |
1陆" (38mm) |
1陆" |
4陆" |
97 GPM |
190 GPM |
22 ft. |
88 ft. |
|
S2065 |
2陆" |
2" |
6陆" |
245 GPM |
400 GPM |
47 ft. |
190 ft. |
|
S2065LV |
1陆" (38mm) |
1陆" |
6陆" |
100 GPM |
200 GPM |
44 ft. |
180 ft. |
|
S2065HV |
3" |
2" |
6陆" |
370 GPM |
500 GPM |
50 ft. |
200 ft. |
|
S2075 |
3" |
1陆" |
811/16" |
125 GPM |
300 GPM |
80 ft. |
320 ft. |
|
S2085 |
3" (76mm) |
2陆" |
811/16" |
480 GPM |
840 GPM |
85 ft. |
342 ft. |
|
S2085LV |
2" |
1陆" |
8陆" |
70 GPM |
145 GPM |
81 ft. |
330 ft. |
|
S2092 |
3" |
2" |
9录" |
390 GPM |
700 GPM |
92 ft. |
360 ft. |
MODEL S2045
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
17.52 (445)
|
3.50 (89)
|
0.88 (22)
|
2.92 (74)
|
3.43 (87)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
18.90 (480)
|
4.50 (114)
|
0.88 (22)
|
2.92 (74)
|
3.43 (87)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
20.15 (512)
|
4.50 (114)
|
1.09 (28)
|
2.92 (74)
|
3.43 (87)
|
8.49 (216)
|
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
| 2045 | 1.5 (40) | 1.5 (40) | 3.88 (98) | 1.81 (46) | 2.25 (57) |
| 2045 | 2.0 (50) | 1.5 (40) | 3.88 (98) | 1.81 (46) | 2.25 (57) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
1陆" x 1陆" x 4陆" Model S2045 - 60 Hz Pump Curve, 95-07014 || PDF
2" x 1陆" x 4陆" Model S2045 - 60 Hz Pump Curve, 95-07013 || PDF
听
60 Hz - 3500 RPM Curves:
1陆" x 1陆" x 4陆" Model S2045 - 60 Hz Pump Curve, 95-07015 ||听PDF
2" x 1陆" x 4陆" Model S2045 - 60 Hz Pump Curve, 95-07016 || PDF
听
50 Hz - 1450 RPM Curves:
1陆" x 1陆" x 4陆" Model S2045 - 50 Hz Pump Curve, 95-07046 || PDF
2" x 1陆" x 4陆" Model S2045 - 50 Hz Pump Curve, 95-07045 || PDF
听
50 Hz - 2900 RPM Curves:
1陆" x 1陆" x 4陆" Model S2045 - 50 Hz Pump Curve, 95-07025 || PDF
2" x 1陆" x 4陆" Model S2045 - 50 Hz Pump Curve, 95-07026 || PDF
MODEL S2065
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.43 (468)
|
3.50 (89)
|
0.88 (22)
|
2.71 (69)
|
4.53 (115)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
19.81 (503)
|
4.50 (114)
|
0.88 (22)
|
2.71 (69)
|
4.53 (115)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
21.01 (534)
|
4.50 (114)
|
1.09 (28)
|
2.71 (69)
|
4.53 (115)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
22.81 (579)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.53 (115)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
23.94 (608)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.53 (115)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
26.07 (662)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.53 (115)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
27.83 (707)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.53 (115)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.43 (798) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.53 (115) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.64 (804) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.53 (115) | 14.44 (367) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
| S2065 | 2.5 (65) | 2.0 (51) | 4.94 (125) | 2.68 (68) | 2.88 (73) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
2陆" x 2" x 6陆" Model S2065 - 60 Hz Pump Curve, 95-07175 || PDF
听
60 Hz - 3500 RPM Curves:
2陆" x 2" x 6陆" Model S2065 - 60 Hz Pump Curve, 95-07177 || PDF
听
50 Hz - 1450 RPM Curves:
2陆" x 2" x 6陆" Model S2065 - 50 Hz Pump Curve, 95-07174 || PDF
听
MODEL S2065HV
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.85 (479)
|
3.50 (89)
|
0.88 (22)
|
2.71 (69)
|
4.96 (126)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
20.23 (514)
|
4.50 (114)
|
0.88 (22)
|
2.71 (69)
|
4.96 (126)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
21.43 (544)
|
4.50 (114)
|
1.09 (28)
|
2.71 (69)
|
4.96 (126)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
23.23 (590)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.96 (126)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
24.36 (618)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.96 (126)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
26.49 (673)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.96 (126)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
28.25 (718)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.96 (126)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.85 (809) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.96 (126) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 32.06 (814) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.96 (126) | 14.44 (367) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2065HV |
3.0 (76) |
2.0 (51) |
4.94 (125) |
3.04 (77) |
2.88 (73) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
听
60 Hz - 3500 RPM Curves:
听
50 Hz - 1450 RPM Curves:
听
50 Hz - 2900 RPM Curves:
听
MODEL S2065LV
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
17.93 (455)
|
3.50 (89)
|
0.88 (22)
|
2.71 (69)
|
4.03 (102)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
19.31 (490)
|
4.50 (114)
|
0.88 (22)
|
2.71 (69)
|
4.03 (102)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
20.56 (522)
|
4.50 (114)
|
1.09 (28)
|
2.71 (69)
|
4.03 (102)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
22.31 (567)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.03 (102)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
23.44 (595)
|
5.25 (133)
|
1.38 (35)
|
2.97 (75)
|
4.03 (102)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
25.57 (649)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.03 (102)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
27.33 (694)
|
6.25 (159)
|
1.38 (35)
|
3.97 (101)
|
4.03 (102)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 30.93 (786) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.03 (102) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.14 (791) | 7.0 (178) | 2.0 (63) | 3.97 (101) | 4.03 (102) | 14.44 (367) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2065LV |
1.5 (38) |
1.5 (38) |
4.94 (125) |
2.43 (62) |
3.13 (79) |
|
S2065LV |
2.0 (51) |
1.5 (38) |
4.94 (125) |
2.43 (62) |
3.13 (79) |
|
S2065LV |
2.5 (65) |
1.5 (38) |
4.94 (125) |
2.43 (62) |
3.13 (79) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
听
60 Hz - 3500 RPM Curves:
听
50 Hz - 1450 RPM Curves:
听
50 Hz - 2900 RPM Curves:
MODEL S2075
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.17 (461)
|
3.50 (89)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
19.55 (497)
|
4.50 (114)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
20.80 (528)
|
4.50 (114)
|
1.09 (28)
|
2.75 (70)
|
4.24 (108)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
22.39 (569)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
23.52 (597)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
25.65 (651)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
27.41 (696)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.01 (788) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.22 (793) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 324JM | 23.05 (585) | 14.61 (371) | 33.11 (841) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
| 326JM | 23.05 (585) | 14.61 (371) | 33.11 (841) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2075 |
3.0 (76) |
1.5 (40) |
6.69 (170) |
2.70 (69) |
4.32 (110) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
听
60 Hz - 3500 RPM Curves:
听
50 Hz - 1450 RPM Curves:
听
50 Hz - 2900 RPM Curves:
MODEL S2085
NOTE:听Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.84 (478)
|
3.50 (89)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
21.21 (513)
|
4.50 (114)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
21.46 (545)
|
4.50 (114)
|
1.09 (28)
|
2.75 (70)
|
4.24 (108)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
23.06 (586)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
24.19 (614)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
26.32 (668)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
28.08 (713)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.68 (805) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.89 (810) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 324JM | 23.05 (585) | 14.61 (371) | 33.78 (858) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
| 326JM | 23.05 (585) | 14.61 (371) | 33.78 (858) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE:听Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2085 |
3.0 (76) |
2.5 (64) |
5.75 (146) |
2.93 (74) |
3.82 (97) |
|
S2085 |
4.0 (102) |
2.5 (64) |
5.75 (146) |
2.93 (74) |
3.82 (97) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
3" x 2陆 " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07183 || PDF
4" x 2陆 " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07187 || PDF
听
60 Hz - 3500 RPM Curves:
3" x 2陆 " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07185 || PDF
4" x 2陆 " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07189 || PDF
听
50 Hz - 1450 RPM Curves:
3" x 2陆 " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07182 || PDF
4" x 2陆 " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07186 || PDF
听
50 Hz - 2900 RPM Curves:
3" x 2陆 " x 8.7" Model S2085 - 60 Hz Pump Curve, 95-07184 || PDF
4" x 2陆 " x 8.5" Model S2085 - 60 Hz Pump Curve, 95-07188 || PDF
MODEL S2085LV
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.17 (461)
|
3.50 (89)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
19.55 (497)
|
4.50 (114)
|
0.88 (22)
|
2.75 (70)
|
4.24 (108)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
20.80 (528)
|
4.50 (114)
|
1.09 (28)
|
2.75 (70)
|
4.24 (108)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
22.39 (569)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
23.52 (597)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.24 (108)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
25.65 (651)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
27.41 (696)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.24 (108)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.01 (788) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.22 (793) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.24 (108) | 14.44 (367) |
| 324JM | 23.05 (585) | 14.61 (371) | 33.11 (841) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
| 326JM | 23.05 (585) | 14.61 (371) | 33.11 (841) | 8.0 (203) | 2.5 (63) | 3.84 (98) | 4.24 (108) | 16.25 (413) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2085LV |
2.0 (51) |
1.5 (40) |
6.69 (170) |
2.70 (69) |
4.32 (110) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
听
60 Hz - 3500 RPM Curves:
听
50 Hz - 1450 RPM Curves:
听
50 Hz - 2900 RPM Curves:
MODEL S2092
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
18.78 (477)
|
3.50 (89)
|
0.88 (22)
|
2.75 (70)
|
4.85 (123)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
20.16 (512)
|
4.50 (114)
|
0.88 (22)
|
2.75 (70)
|
4.85 (123)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
21.41 (544)
|
4.50 (114)
|
1.09 (28)
|
2.75 (70)
|
4.85 (123)
|
8.49 (216)
|
| 213JM |
13.18 (335)
|
8.04 (204)
|
23.00 (584)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.85 (123)
|
10.39 (264)
|
| 215JM |
13.18 (335)
|
8.04 (204)
|
24.13 (613)
|
5.25 (133)
|
1.38 (35)
|
2.84 (72)
|
4.85 (123)
|
10.39 (264)
|
| 254JM |
15.34 (390)
|
9.40 (239)
|
26.26 (667)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.85 (123)
|
11.39 (289)
|
| 256JM |
15.34 (390)
|
9.40 (239)
|
28.02 (712)
|
6.25 (159)
|
1.38 (35)
|
3.84 (98)
|
4.85 (123)
|
11.39 (289)
|
| 284JM | 20.78 (528) | 13.12 (333) | 31.62 (803) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.85 (123) | 14.44 (367) |
| 286JM | 20.49 (520) | 13.12 (333) | 31.83 (808) | 7.0 (178) | 2.0 (63) | 3.84 (98) | 4.85 (123) | 14.44 (367) |
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
|
S2092 |
3.0 (76) |
2.0 (51) |
6.64 (169) |
3.09 (78) |
4.62 (117) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized 糖心vlog安卓破解 personnel prior to placing an order. 糖心vlog安卓破解 is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
听
60 Hz - 3500 RPM Curves:
听
50 Hz - 1450 RPM Curves:
听
50 Hz - 2900 RPM Curves:
Product Options:
- 15 or 20 Ra., electropolish and passivation product contact surface finishes
- Double mechanical seals
- Casing drain
- SS motors
- USP Class VI elastomers
- Stainless steel motors
- SS Leg Kits
- Ra Mapping
- Certified and witness performance testing
- Pedestal mounted pumps
- Stainless steel bases and coupling guards
听
Casing Drain Options
Front Facing - Models S2065 - S2092
 |
 |
 |
 |
| 0 DEGREE | 90 DEGREE | 45 DEGREE | LIQUID RING |
听
Bottom Facing - Models S2045 - S2092
 |
 |
 |
| 0 DEGREE | 90 DEGREE | 45 DEGREE |
听
Tangential - Models S2045 - S2092
 |
|
 |
 |
|
0 DEGREE LEFT FACING |
90 DEGREE LEFT FACING | 45 DEGREE LEFT FACING | LIQUID RING LEFT FACING |
 |
 |
 |
 |
| 0 DEGREE RIGHT FACING | 90 DEGREE RIGHT FACING | 45 DEGREE RIGHT FACING | LIQUID RING RIGHT FACING |
听
Front Facing with 90 Degree Elbow - Models S2045 - S2092
 |
 |
 |
| 0 DEGREE | 90 DEGREE | 45 DEGREE |
Centrifugal Pump Curve Instructions || US
Model S2045
S200 Series - Model S2045 - 1陆" x 1陆" x 4陆" - 1450 RPM - 50 Hz - 95-07046 || PDF
S200 Series - Model S2045 - 2" x 1陆" x 4陆" - 1450 RPM - 50 Hz - 95-07045 || PDF
S200 Series - Model S2045 - 1陆" x 1陆" x 4陆" - 1750 RPM - 60 Hz - 95-07014 || PDF
S200 Series - Model S2045 - 2" x 1陆" x 4陆" - 1750 RPM - 60 Hz - 95-07013 || PDF
S200 Series - Model S2045 - 1陆" x 1陆" x 4陆" - 2900 RPM - 50 Hz - 95-07025 || PDF
S200 Series - Model S2045 - 2" x 1陆" x 4陆" - 2900 RPM - 50 Hz - 95-07026 || PDF
S200 Series - Model S2045 - 1陆" x 1陆" x 4陆" - 3500 RPM - 60 Hz - 95-07015 || PDF
S200 Series - Model S2045 - 2" x 1陆" x 4陆" - 3500 RPM - 60 Hz - 95-07016 || PDF
Model S2065
S200 Series - Model S2065 - 2陆" x 2" x 6陆" - 1450 RPM - 50 Hz - 95-07174 || PDF
S200 Series - Model S2065 - 2陆" x 2" x 6陆" - 1750 RPM - 60 Hz - 95-07175 || PDF
S200 Series - Model S2065 - 2陆" x 2" x 6陆" - 2900 RPM - 50 Hz - 95-07176 || PDF
S200 Series - Model S2065 - 2陆" x 2" x 6陆" - 3500 RPM - 60 Hz - 95-07177 || PDF
Model S2065HV
S200 Series - Model S2065HV - 3" x 2 " x 6陆" - 1450 RPM - 50 Hz - 95-07190 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6陆" - 1750 RPM - 60 Hz - 95-07191 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6陆" - 2900 RPM - 50 Hz - 95-07192 || PDF
S200 Series - Model S2065HV - 3" x 2 " x 6陆" - 3500 RPM - 60 Hz - 95-07193 || PDF
Model S2065LV
S200 Series - Model S2065LV - 1陆" x 1陆" x 6陆" - 1450 RPM - 50 Hz - 95-07162 || PDF
S200 Series - Model S2065LV - 2" x 1陆" x 6陆" - 1450 RPM - 50 Hz - 95-07166 || PDF
S200 Series - Model S2065LV - 2陆" x 1陆 " x 6陆" - 1450 RPM - 50 Hz - 95-07170 || PDF
S200 Series - Model S2065LV - 1陆" x 1陆" x 6陆" - 1750 RPM - 60 Hz - 95-07169 || PDF
S200 Series - Model S2065LV - 2" x 1陆" x 6陆" - 1750 RPM - 60 Hz - 95-07167 || PDF
S200 Series - Model S2065LV - 2陆" x 1陆 " x 6陆" - 1750 RPM - 60 Hz - 95-07171 || PDF
S200 Series - Model S2065LV - 1陆" x 1陆" x 6陆" - 2900 RPM - 50 Hz - 95-07164 || PDF
S200 Series - Model S2065LV - 2" x 1陆" x 6陆" - 2900 RPM - 50 Hz - 95-07168 || PDF
S200 Series - Model S2065LV - 2陆" x 1陆 " x 6陆" - 2900 RPM - 50 Hz - 95-07172 || PDF
S200 Series - Model S2065LV - 1陆" x 1陆" x 6陆" - 3500 RPM - 60 Hz - 95-07165 || PDF
S200 Series - Model S2065LV - 2" x 1陆" x 6陆" - 3500 RPM - 60 Hz - 95-07169 || PDF
S200 Series - Model S2065LV - 2陆" x 1陆 " x 6陆" - 3500 RPM - 60 Hz - 95-07173 || PDF
Model S2075
S200 Series - Model S2075 -3" x 1陆 " x 8.7" - 1450 RPM - 50 Hz - 95-07194 || PDF
S200 Series - Model S2075 - 3" x 1陆 " x 8.7" - 1750 RPM - 60 Hz - 95-07195 || PDF
S200 Series - Model S2075 - 3" x 1陆 " x 8.7" - 2900 RPM - 50 Hz - 95-07196 || PDF
S200 Series - Model S2075 - 3" x 1陆 " x 8.7" - 3500 RPM - 60 Hz - 95-07197 || PDF
Model S2085
200 Series - Model S2085 - 3" x 2陆 " x 8.7" - 1450 RPM - 50 Hz - 95-07182 || PDF
S200 Series - Model S2085 -4" x 2陆 " x 8.5" - 1450 RPM - 50 Hz - 95-07186 || PDF
S200 Series - Model S2085 - 3" x 2陆 " x 8.7" - 1750 RPM - 60 Hz - 95-07183 || PDF
S200 Series - Model S2085 - 4" x 2陆 " x 8.5" - 1750 RPM - 60 Hz - 95-07187 || PDF
S200 Series - Model S2085 - 3" x 2陆 " x 8.7" - 2900 RPM - 50 Hz - 95-07184 || PDF
S200 Series - Model S2085 - 4" x 2陆 " x 8.5" - 2900 RPM - 50 Hz - 95-07188听|| PDF
S200 Series - Model S2085 - 3" x 2陆 " x 8.7" - 3500 RPM - 60 Hz - 95-07185 || PDF
S200 Series - Model S2085 - 4" x 2陆 " x 8.5" - 3500 RPM - 60 Hz - 95-07189 || PDF
Model S2085LV
S200 Series - Model S2065HV - 3" x 2 " x 6陆" - 3500 RPM - 60 Hz - 95-07178 || PDF
S200 Series - Model S2085LV - 2" x 1陆 " x 8.7" - 1750 RPM - 60 Hz - 95-07179 || PDF
S200 Series - Model S2085LV - 2" x 1陆 " x 8.7" - 2900 RPM - 50 Hz - 95-07180 || PDF
S200 Series - Model S2085LV - 2" x 1陆 " x 8.7" - 3500 RPM - 60 Hz - 95-07181 || PDF
Model S2092
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 1450 RPM - 50 Hz - 95-07198 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 1750 RPM - 60 Hz - 95-07199 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 2900 RPM - 50 Hz - 95-07200 || PDF
S200 Series - Model S2092 - 3" x 2 " x 9.25" - 3500 RPM - 60 Hz - 95-07201 || PDF
听