Products
- Analyzers
- Automation Systems
- Butter Equipment
- Centrifuges
- Cleaning-in-Place Systems
- Deareators
- Draught Regulators
- Evaporators
- Fat Crystalization Equipment
- Filters & Strainers
- Fluid Bed Dryers
- Heat Exchangers
- Homogenizers
- Membrane Filtration Systems
- Microparticulation Systems
- Mixers & Agitators
- Pasturization Systems
- Pigging Systems
- Plumbing Products
- Pumps
- Recreational Marine Products
- Recreational Marine Pumps
- Spin Flash Dryers
- Spray Dryers
- UHT Systems
- Valves
- Adhesives & Sealants
- Automotive Heating System
- Baby Food
- Bakery Filing Cream
- Beer, Cider, Wine & Spirits
- Biodiesel
- Boats & Watercraft
- Building Infrastructure
- Butter & Spreads
- Cement
- Cheese
- Chocolate
- Coffee & Tea
- Condiments, Sauces & Soups
- Cosmetics
- Dairy Powders
- Ethanol
- Flavors & Fragrances
- Fruit Juice
- Fuel Supply System
- Hair, Nail & Skin Care Products
- Ice Cream
- Inorganic Chemicals
- Margarine & Shortening
- Meat & Animal-Based Proteins
- Milk & Cream
- Neutralization
- Nutraceuticals
- Oral Care
- Paints & Coatings
- Petrochemicals
- Pipelines
- Plant-Based Food & Beverages
- Plastic & Resins
- Refinery
- Soft Drinks
- Solvents & Solutions
- Specialty Chemicals
- Synthetic Rubber
- Yogurt
Universal 1 Series - Aseptic - Positive Displacement Pumps
Aseptic positive displacement pumps. Live steam or sterile solution is circulated to ports, cover, product seal areas, where bacteria might enter.
FEATURES
Live steam or sterile solution is circulated to ports, cover and product seal areas, where bacteria might enter.
- Uses live steam or sterile fluid
- 316L stainless steel pump body standard
- Mechanical seals standard
- Easy to clean, disassemble
- Maximum pressure: 200 psi (13.8 bar)*
- Temperature range: -40°F (-40°C) to 300°F (149°C)
*Contact Applications Engineering for higher pressure or higher temperature applications.
Product Specifications
|
MODEL |
DISPLACEMENT |
NOMINAL |
INLET/ |
PRESSURE |
MAX |
TEMP |
|---|---|---|---|---|---|---|
| 033 | 0.051 GAL. (0.193 Liter) | 30 GPM (6.8 m³/hr.) | 1.5" (38mm) | 225 PSI (15.5 bar) | 600 | Std: -40°F (-40°C) to 180°F (82°C); FF: 180°F (82°C) to 200°F (93°C); Hot/XHot: -40°F (-40°C) to 300°F (149°C |
| 133 | 0.205 GAL. (0.776 Liter) | 120 GPM (27.3 m³/hr.) | 3" (76mm) | 225 PSI (15.5 bar) | 600 | |
| 223 | 0.440 GAL. (1.666 Liter) | 260 GPM (59.1 m³/hr.) | 4" (102mm) | 225 PSI (15.5 bar) | 600 | |
| 323 | 0.616 GAL. (2.332 Liter) | 360 GPM (81.8 m³/hr.) | 6"(152mm) | 225 PSI (15.5 bar) | 600 |
MODEL 006-U1
0-800 RPM speed range. 1½" port size; optional 1" port size available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN |
4.75 |
8.30 |
3.75 |
12.04 |
13.47 |
15.25 |
5.50 |
1.94 |
2.31 |
.41,SLOT |
7.66 |
2.93 |
9.61 |
4.21 |
0.875 |
3.49 |
6.97 |
|
MM |
121 |
211 |
95 |
306 |
342 |
387 |
140 |
49 |
59 |
10,SLOT |
194 |
74 |
244 |
107 |
22 |
89 |
177 |
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U1 to 030-U1, 1"-11-½ NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 60 lb. (27 kg.)
NOTE:ÌýDimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 015-U1
0-700 RPM speed range. 1½" port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
4.75
|
8.30
|
3.75
|
12.04
|
13.47
|
15.25
|
5.50
|
1.94
|
2.31
|
.41,SLOT
|
7.66
|
2.93
|
9.61
|
4.21
|
0.875
|
3.49
|
6.97
|
|
MM
|
121
|
211
|
95
|
306
|
342
|
387
|
140
|
49
|
59
|
10,SLOT
|
194
|
74
|
244
|
107
|
22
|
89
|
177
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 60 lb. (27 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 018-U1
0-600 RPM speed range. 1½" port size; 2" optional port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
4.75
|
8.30
|
3.75
|
12.46
|
13.90
|
15.67
|
5.50
|
1.94
|
2.31
|
.41,SLOT
|
7.66
|
2.93
|
9.84
|
4.21
|
0.875
|
3.55
|
7.09
|
|
MM
|
121
|
211
|
95
|
316
|
353
|
398
|
140
|
49
|
59
|
10,SLOT
|
194
|
74
|
250
|
107
|
22
|
90
|
180
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 64 lb. (29 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 030-U1
0-600 RPM speed range. 2" port size; suitable to 150 PSI (10 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
6.25
|
10.29
|
4.25
|
14.58
|
16.42
|
17.67
|
6.86
|
2.31
|
2.56
|
.41,SLOT
|
8.83
|
3.56
|
11.61
|
5.21
|
1.250
|
4.25
|
8.50
|
|
MM
|
159
|
261
|
108
|
370
|
417
|
449
|
174
|
59
|
65
|
10,SLOT
|
224
|
90
|
295
|
132
|
32
|
108
|
216
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 130 lb. (59 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 040-U1
0-600 RPM speed range. 2½" port size; 3" optional port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
6.25
|
10.29
|
4.25
|
14.87
|
16.87
|
17.96
|
6.86
|
2.31
|
2.56
|
.41slot
|
8.83
|
3.56
|
11.99
|
5.21
|
1.25
|
4.31
|
8.62
|
|
MM
|
159
|
261
|
108
|
378
|
428
|
456
|
174
|
59
|
65
|
10 slot
|
224
|
90
|
305
|
132
|
31.75
|
109
|
219
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 140 lb. (64 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 060-U1
0-600 RPM speed range. 3" port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
8.25
|
15.31
|
5.87
|
18.91
|
20.69
|
22.07
|
9.56
|
3.50
|
4.12
|
.53
|
10.99
|
5.06
|
15.14
|
7.31
|
1.625
|
5.37
|
10.75
|
|
MM
|
210
|
389
|
149
|
480
|
526
|
561
|
243
|
89
|
105
|
13
|
279
|
129
|
385
|
186
|
41.28
|
136
|
273
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 285 lb. (130 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 130-U1
0-600 RPM speed range. 4" port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| Ìý Ìý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
8.25
|
15.31
|
5.87
|
19.85
|
21.63
|
23.01
|
9.56
|
3.50
|
4.12
|
.53
|
10.99
|
5.06
|
15.77
|
7.31
|
1.625
|
5.37
|
10.75
|
|
MM
|
210
|
389
|
149
|
504
|
549
|
584
|
243
|
89
|
105
|
13
|
279
|
129
|
401
|
186
|
41.28
|
136
|
273
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 305 lb. (138 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 220-U1
0-600 RPM speed range. 4" port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| ÌýÌý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
8.50
|
19.13
|
9.00
|
23.37
|
--
|
27.87
|
12.38
|
3.75
|
7.25
|
.53,SLOT
|
14.80
|
6.38
|
18.49
|
9.38
|
2.00
|
6.63
|
13.25
|
|
MM
|
216
|
486
|
229
|
594
|
--
|
708
|
314
|
95
|
184
|
13,SLOT
|
376
|
162
|
470
|
238
|
50.80
|
168
|
337
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 565 lb. (256 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
MODEL 320-U1
0-600 RPM speed range. 6", 150# flanged port size; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
| ÌýÌý | A | AO | B | CP | CP1 | CP4 | D | E | F | G | I | J | L | O | U | X | 2X |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IN
|
12.00
|
22.38
|
11.63
|
30.17
|
--
|
--
|
13.88
|
5.25
|
8.00
|
.66
|
17.80
|
6.88
|
21.92
|
10.38
|
2.375
|
8.00
|
16.00
|
|
MM
|
305
|
568
|
295
|
766
|
--
|
--
|
353
|
133
|
203
|
17
|
452
|
175
|
557
|
264
|
60.45
|
203
|
406
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U1 to 030-U1, 1"-11- NPT on Models 060-U1 and 130-U1.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.
Approximate shipping weight 900 lb. (408 kg.)
NOTE: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.
Body Standard:Ìý 316L Stainless Steel with body retaining screws Ports Standard: Aseptic flange Covers Standard:ÌýÌý316L SS aseptic cover Rotors Standard:ÌýÌýAlloy 88 Twin Wing. Standard clearance for up toÌý180° F (82° C) Options:
- Front face clearance
- Hot clearance
- Minimum clearance
- Single wing for 423, 523
O-Rings Standard: EPDM Options:
- Fluoroelastomer (FKM)
- Perfluoroelastomer (PTFM/FFKM)
- Silicone
- EPDM-SF
- EPDM - Class VI
- FKM - Class VI
Seals Standard: Double mechanical Gearcase Standard: Cast iron powder coated, 316L SS shafts, top shaftÌýposition, stainless Steel bearing retainers, left hand shaft position Options:
- Stainless Steel gearcase
- Steel-It paint
- 17-4 PH shafts
- Lower shaft position
- Bearing Isolators
- Pedestal shims for side mounted pumps. Left hand shaft position standard
- Right hand shaft position on side mounted gearcase
Bases Standard:ÌýFlat plate, epoxy painted, with adjustable feet, SS couplingÌýguard, and Lovejoy or Woods coupling Options:
- 304 SS unpolished plate base with adjustable feet
- SS tubular bases
Drives
- WCB ISR Integral Speed Reducer Sizes 49, 79 and 239.
- Direct connected gear motors.
°Õ°ù³Ü-¹ó¾±³Ù® Close coupled °Õ°ù³Ü-¹ó¾±³Ù® pump mounted on stainless steel baseÌýwith stainless steel adaptors standard. Features:
- No shaft alignment necessary. No coupling guard required.
- Special base design enhances cleanability.
- Reduces overall length of complete unit by an average of 20-25%.
- Average of 20-25 gear ratios available per horsepower.
- Separate oil sump for gear reducer and timing gears.
Options:
- 304 SS polished plate base.
- NEMA or IEC frames available. Right angle reducer also available for additional space savings.
- 1/2 through 60 horsepower drive options available.
- Horizontal or vertical porting.
Click on the links below to download pump model performance curves for Universal 1 Series Positive Displacement pumps.
Download Instructions for Reading Positive Displacement Pump Curves || PDF
- Universal 1 Series - Model 006 - Performance Curve - 95-07133 || PDF
- Universal 1 Series - Model 015 - Performance Curve - 95-07134 || PDF
- Universal 1 Series - Model 018 - Performance Curve - 95-07135 || PDF
- Universal 1 Series - Model 030 - Performance Curve - 95-07136 || PDF
- Universal 1 Series - Model 040 - Performance Curve - 95-07241 || PDF
- Universal 1 Series - Model 060 - Performance Curve - 95-07137 || PDF
- Universal 1 Series - Model 130 - Performance Curve - 95-07138 || PDF
- Universal 1 Series - Model 220 - Performance Curve - 95-07139 || PDF
- Universal 1 Series - Model 320 - Performance Curve - 95-07140 || PDF
Ìý