Universal 2 Series - AP (Automotive Paint) - Positive Displacement Pumps
Product Type(s) : Positive Displacement Pumps
Description :
WHERE TO BUY
This positive displacement pump is manufactured specifically for paint re-circulation in the automotive industry.
FEATURES
A modification of the Universal 2 positive displacement pump, this pump is manufactured specifically for paint re-circulation in the automotive industry. Features:
- 316 stainless steel pump body and cover.
- Exclusive, non-galling Waukesha 鈥�88鈥� alloy rotors standard; permits running at听tighter clearances and pumping a wide range of viscosities.
- Rotor/shaft connection sealed from product zone.
- Mechanical seals standard. Single or flushed double.
- Up to 500 psi (34.5 bar) pressure capability.
- Rotor nut designed for extended service without loosening.
- No bearings in product zone.
- Larger diameter 17-4 PH shafts in seal area for greater strength and stiffness.听Helps eliminate vibration; extends seal life.
- Heavy duty bearing frame.
- Double tapered roller bearings on all models. Contribute further to precise rotor听position and longer seal life.
- Silicone free grease lubed bearings for positive lubrication to all bearings over听entire speed, temperature and pressure range.
- Body retaining screws for maintaining mechanical seal contact during inspection.
- O-ring on inner seal, seals on clean surface as seal moves due to wear.
- Bearing isolators keep product out of gearcase and bearings.
Benefits:
- Protects water-borne shear sensitive paints.
- Pigments are not separated, which can change viscosity and cause color shifts.
- Aluminum and mica metallic flakes are not damaged, which result in deep rich paint听luster, and shiny finish.
- Color matching between body and components is not a problem.
- Substantial energy cost savings compared to turbine and piston pumps.
- Constant flow regardless of system pressure changes, results in high film quality and听thickness.
- Pressure surges eliminated.
- Minimal heat added to product.
- Pumps are energy efficient, and easily cleaned, maintained, and repaired.
Pump Comparisons:
Requirements
Waukesha
Turbine
Piston
Eliminates surge suppression
YES
YES
NO
Constant flow regardless of system pressure changes
YES
YES
YES
Minimal heat input
YES
NO
YES
Variable speed drive options
YES
NO
YES
Energy efficient
YES
NO
NO
Easily repaired
YES
NO
NO
Easily maintained
YES
YES
NO
Prevent metallic flake degradation
YES
NO
YES
Product Specifications
Model AP 015-U2
| 听 | 听 | 听 | 听 | 听 | 听 | 听 | 听 |
|---|---|---|---|---|---|---|---|
| 听 | CP | I | L | O | PORT SIZE | U +.000-.001 | 2X |
| IN | 11.71 | 7.66 | 9.61 | 4.21 | 1-1/2" | 0.875 | 6.97 |
| MM | 297 | 194 | 244 | 107 | ----- | 22.23 | 177 |
听
NOTE: Dimension 鈥�2X鈥� applies for 鈥淪鈥�-Clamp on Models 015 through 220. D I N and other connections available. Dimension 鈥�2X鈥� applies for 6鈥� (152 mm) 150 lb. RF Flange on Model 320.