Products
- Analyzers
- Automation Systems
- Butter Equipment
- Centrifuges
- Cleaning-in-Place Systems
- Deareators
- Draught Regulators
- Evaporators
- Fat Crystalization Equipment
- Filters & Strainers
- Fluid Bed Dryers
- Heat Exchangers
- Homogenizers
- Membrane Filtration Systems
- Microparticulation Systems
- Mixers & Agitators
- Pasturization Systems
- Pigging Systems
- Plumbing Products
- Pumps
- Recreational Marine Products
- Recreational Marine Pumps
- Spin Flash Dryers
- Spray Dryers
- UHT Systems
- Valves
- Adhesives & Sealants
- Automotive Heating System
- Baby Food
- Bakery Filing Cream
- Beer, Cider, Wine & Spirits
- Biodiesel
- Boats & Watercraft
- Building Infrastructure
- Butter & Spreads
- Cement
- Cheese
- Chocolate
- Coffee & Tea
- Condiments, Sauces & Soups
- Cosmetics
- Dairy Powders
- Ethanol
- Flavors & Fragrances
- Fruit Juice
- Fuel Supply System
- Hair, Nail & Skin Care Products
- Ice Cream
- Inorganic Chemicals
- Margarine & Shortening
- Meat & Animal-Based Proteins
- Milk & Cream
- Neutralization
- Nutraceuticals
- Oral Care
- Paints & Coatings
- Petrochemicals
- Pipelines
- Plant-Based Food & Beverages
- Plastic & Resins
- Refinery
- Soft Drinks
- Solvents & Solutions
- Specialty Chemicals
- Synthetic Rubber
- Yogurt

Universal 2 Series - Positive Displacement Pumps
The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility.Ìý Clean-in-Place (CIP) capable with optional flat body profile and free draining vertical ports.Ìý This highly robust pump can run at pressures of up to 500 psi.
FEATURES
Key Features & Benefits
- CIP capability available. Pump body has optional internal flat body profile andwill free drain with vertical ports. Optional rotor and body hub drilling providedfor difficult CIP cleaning applications.
- Cover is free draining in horizontal or vertical port positions.
- Rotor/shaft connection sealed from product zone.
- Single mechanical seals standard. Optional: double mechanical seals and triple lip seals for reliable performance in chemically aggressive applications or certain COP sanitary applications.
- Seal flush optional: seal areas interconnected to improve circulationand draining of seal flush fluid. Steam-In-Place also is optional.
- Stainless steel bearing frame optional on models 006 to 370.
- Aseptic design (Option)
Long-life Features
- Up to 500 psi (34.5 bar) pressure capability.
- Special rotor nut designed for extended service without loosening.
- No bearings in the product zone.
- Large diameter 17-4 PH shafts for greater strength and stiffness.Helps reduce vibration; extends seal life.
- Heavy duty bearing frame (stainless steel available as an option).
- Double tapered roller bearings.
- Greased lubed bearings for positive lubrication to all bearings over entire speed,temperature and pressure range.
- Body retaining screws for maintaining mechanical seal contact during inspection.
- Extended outer seal life. A wave spring, instead of an O-ring, mechanically loadsthe seal.
- O-Ring on inner seal, seals on clean surface as seal moves due to wear.
- Unique mechanical seal design utilizes 3 pin stationary seal and specialdesign shaft for rotary seal.
Ìý
Ìý
Ìý
Ìý
Ìý
Ìý
Product Specifications
MODEL |
DISPLACEMENT |
NOMINAL |
MAXIMUM |
---|---|---|---|
006-U2 | 0.0082 Gal. (0.031 Liter) | 8 GPM (1.8 m³/hr.) |
300 PSI (20.7 bar)
|
015-U2 | 0.0142 Gal. (0.054 Liter) | 11 GPM (2.5 m³/hr.) |
250 PSI (17.2 bar)
|
018-U2 | 0.029 Gal. (0.110 Liter) | 20 GPM (4.5 m³/hr.) |
200 PSI (13.8 bar)
|
030-U2 | 0.060 Gal. (0.227 Liter) | 36 GPM (8.2 m³/hr.) |
250 PSI (17.2 bar)
|
040-U2
|
0.076 Gal. (0.288 Liter)
|
45 GPM (10.2 m³/hr.)
|
150 PSI (10.3 bar)
|
045-U2 | 0.098 Gal. (0.371 Liter) | 58 GPM (13.2 m³/hr.) |
450 PSI (31.0 bar)
|
060-U2 | 0.153 Gal. (0.579 Liter) | 90 GPM (20.4 m³/hr.) |
300 PSI (20.7 bar)
|
130-U2 | 0.253 Gal. (0.958 Liter) | 150 GPM (34.1 m³/hr.) |
200 PSI (13.8 bar)
|
180-U2 | 0.380 Gal. (1.438 Liter) | 230 GPM (52.2 m³/hr.) |
450 PSI (31.0 bar)
|
210-U2 | 0.502 Gal. (1.900 Liter) | 300 GPM (68.1 m³/hr.) |
500 PSI (34.5 bar)
|
213-U2 | 0.502 Gal. (1.900 Liter) | 300 GPM (68.1 m³/hr.) |
500 PSI (34.5 bar)
|
220-U2 | 0.521 Gal. (1.972 Liter) | 310 GPM (70.4 m³/hr.) |
300 PSI (20.7 bar)
|
320-U2 | 0.752 Gal. (2.847 Liter) | 450 GPM (102 m³/hr.) |
300 PSI (20.7 bar)
|
370-U2 | 1.099 gal. (4.160 Liter) | 660 GPM (150 m³/hr.) | 200 PSI (13.8 bar) |
MODEL 006-U2
0-1000 RPM speed range. 1" (25.4 mm) and 1½" (38.1 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
4.75
|
8.3
|
3.75
|
11.71
|
13.92
|
14.92
|
5.50
|
1.94
|
2.31
|
.41slot
|
7.66
|
2.93
|
9.61
|
4.21
|
.875
|
3.49
|
6.97
|
MM
|
121
|
211
|
95
|
297
|
354
|
379
|
140
|
49
|
59
|
10 slot
|
194
|
74
|
244
|
107
|
22.23
|
89
|
177
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U2 to 030-U2, 1"-11- NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 56 lb. (25.4 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 015-U2
0-1000 RPM speed range. 1½" (38.1 mm) port sizes available; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
4.75
|
8.3
|
3.75
|
11.71
|
13.92
|
14.92
|
5.50
|
1.94
|
2.31
|
.41slot
|
7.66
|
2.93
|
9.61
|
4.21
|
.875
|
3.49
|
6.97
|
MM
|
121
|
211
|
95
|
297
|
354
|
379
|
140
|
49
|
59
|
10 slot
|
194
|
74
|
244
|
107
|
22.23
|
89
|
177
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 56 lb. (25.4 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 018-U2
0-700 RPM speed range. 1½" (38.1 mm) and 2" (50.8 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
4.75
|
8.3
|
3.75
|
12.37
|
14.59
|
15.58
|
5.50
|
1.94
|
2.31
|
.41slot
|
7.66
|
2.93
|
9.84
|
4.21
|
.875
|
3.49
|
6.97
|
MM
|
121
|
211
|
95
|
314
|
371
|
396
|
140
|
49
|
59
|
10 slot
|
194
|
74
|
250
|
107
|
22.23
|
89
|
177
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 65 lb. (29.5 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 030-U2
0-600 RPM speed range. 1½" (38.1 mm) and 2" (50.8 mm) port sizes available; suitable to 250 PSI (17.2 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
6.25
|
10.29
|
4.25
|
14.49
|
16.49
|
17.58
|
6.86
|
2.31
|
2.56
|
.41slot
|
8.83
|
3.56
|
11.61
|
5.21
|
1.25
|
4.25
|
8.5
|
MM
|
159
|
261
|
108
|
368
|
419
|
447
|
174
|
59
|
65
|
10 slot
|
224
|
90
|
295
|
132
|
31.75
|
108
|
216
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 130 lb. (59.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 040-U2
0-600 RPM speed range. 2" (50.8 mm) port size available; suitable to 150 PSI (10 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
6.25
|
10.29
|
4.25
|
14.87
|
16.87
|
17.96
|
6.86
|
2.31
|
2.56
|
.41slot
|
8.83
|
3.56
|
11.99
|
5.21
|
1.25
|
4.31
|
8.62
|
MM
|
159
|
261
|
108
|
378
|
428
|
456
|
174
|
59
|
65
|
10 slot
|
224
|
90
|
305
|
132
|
31.75
|
109
|
219
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 140 lb. (64.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 045-U2
0-600 RPM speed range. 2" (50.8 mm) port sizes available; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
8.25
|
15.31
|
5.87
|
18.59
|
20.70
|
22.28
|
9.56
|
3.50
|
4.12
|
.53
|
10.99
|
5.06
|
14.86
|
7.31
|
1.625
|
5.37
|
10.75
|
MM
|
210
|
389
|
149
|
472
|
526
|
566
|
243
|
89
|
105
|
13
|
279
|
129
|
377
|
186
|
41.28
|
136
|
273
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 295 lb. (134.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 060-U2
0-600 RPM speed range. 2½" (63.5 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
8.25
|
15.31
|
5.87
|
19.14
|
21.25
|
22.83
|
9.56
|
3.50
|
4.12
|
.53
|
10.99
|
5.06
|
15.14
|
7.31
|
1.625
|
5.37
|
10.75
|
MM
|
210
|
389
|
149
|
486
|
540
|
580
|
243
|
89
|
105
|
13
|
279
|
129
|
385
|
186
|
41.28
|
136
|
273
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are "-14 NPT on Models 006-U2 to 030-U2, 1"-11- NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 285 lb. (129.3 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 130-U2
0-600 RPM speed range. 3" (76.2 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
8.25
|
15.31
|
5.87
|
20.15
|
22.27
|
23.84
|
9.56
|
3.50
|
4.12
|
.53
|
10.99
|
5.06
|
15.77
|
7.31
|
1.625
|
5.37
|
10.75
|
MM
|
210
|
389
|
149
|
512
|
566
|
606
|
243
|
89
|
105
|
13
|
279
|
129
|
401
|
186
|
41.28
|
136
|
273
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 305 lb. (138.3 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 180-U2
0-600 RPM speed range. 3" (76.2 mm) port sizes available; suitable to 450 PSI (31.0 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
8.50
|
19.13
|
9.00
|
23.26
|
25.32
|
28.51
|
12.38
|
3.75
|
7.25
|
.53 slot
|
14.80
|
6.38
|
18.25
|
9.38
|
2.0
|
6.53
|
13.06
|
MM
|
216
|
486
|
2.29
|
591
|
643
|
724
|
314
|
95
|
184
|
13 slot
|
376
|
162
|
464
|
238
|
50.8
|
168
|
337
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 520 lb. (236.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 210-U2
0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
12.00
|
22.38
|
11.63
|
27.08
|
28.58
|
--
|
13.88
|
5.25
|
8.00
|
.66
|
17.80
|
6.88
|
21.24
|
10.38
|
2.375
|
7.37
|
14.73
|
MM
|
305
|
568
|
295
|
688
|
726
|
--
|
353
|
133
|
203
|
17
|
452
|
175
|
539
|
264
|
60.45
|
187
|
374
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 915 lb. (415.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 213-U2
0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 500 PSI (34.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
12.00
|
22.38
|
11.63
|
27.08
|
-
|
-
|
13.88
|
5.25
|
8.00
|
.66
|
17.80
|
6.88
|
21.24
|
10.38
|
2.375
|
8.62
|
17.25
|
MM
|
305
|
568
|
295
|
688
|
-
|
-
|
353
|
133
|
203
|
17
|
425
|
175
|
539
|
264
|
60.45
|
219
|
438
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 915 lb. (415.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 220-U2
0-600 RPM speed range. 4" (101.6 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
8.50
|
19.13
|
9.00
|
24.00
|
26.06
|
29.25
|
12.38
|
3.75
|
7.25
|
.53 slot
|
14.80
|
6.38
|
18.49
|
9.38
|
2.000
|
6.63
|
13.25
|
MM
|
216
|
486
|
229
|
610
|
662
|
743
|
314
|
95
|
184
|
13 slot
|
376
|
162
|
470
|
238
|
50.80
|
168
|
337
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 590 lb. (268.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 320-U2
0-600 RPM speed range. 6" (152.4 mm) port sizes available; suitable to 300 PSI (20.7 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
CP4
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
12.00
|
22.38
|
11.63
|
27.66
|
29.16
|
--
|
13.88
|
5.25
|
8.00
|
.66
|
17.80
|
6.88
|
21.63
|
10.38
|
2.375
|
8.00
|
16.00
|
MM
|
305
|
568
|
295
|
703
|
741
|
--
|
358
|
133
|
203
|
17
|
452
|
175
|
549
|
264
|
60.45
|
203
|
406
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 895 lb. (406.0 kg.).
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
MODEL 370-U2
0-600 RPM speed range. 6" (152.4 mm) port sizes available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).
Ìý
Ìý
|
A
|
AO
|
B
|
CP
|
CP1
|
D
|
E
|
F
|
G
|
I
|
J
|
L
|
O
|
U
|
X
|
2X
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
IN
|
12.00
|
22.38
|
11.63
|
29.16
|
30.66
|
13.88
|
5.25
|
8.00
|
.66
|
17.80
|
6.88
|
22.32
|
10.38
|
2.38
|
8.50
|
17.00
|
MM
|
305
|
568
|
295
|
741
|
779
|
353
|
133
|
203
|
17
|
452
|
175
|
567
|
264
|
60.5
|
216
|
432
|
CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 006-U2 to 030-U2, 1"-11-½ NPT on Models 042-U2 to 220-U2.
Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings (except 320 U2).
Approximate shipping weight 945 lb. (428.6 kg.)
NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed.Ìý Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
Additional Dimensions: Universal 2 Series Tru-Fit® Dimensions
Ports Standard:ÌýÌýSanitary Clamp Type Is available in a variety of styles including S-Line, I-Line and Q-Line
- Bevel Seat Available
- Optional European Types; DIN, SMS, RJT
- Male NPT and 150 lb. flanges optional on Models 006 through 220 size.
- 150 lb. flanges standard on Model 320.
- Contact factory for available rectangular flange inlets.
Rotors Standard:ÌýÌýTwin Wing - Standard; suitable for most applications.
- Single Wing - For reduced breakage on fluids with discrete particulates, such as diced tomato products
Rotor clearance Standard:ÌýÌýup to 180°F (82°C)
- Hot clearance rotors option for applications up to 300°F (149°C).
- Other special clearances available
O-Rings Standard:ÌýÌýBuna-N Options:
- PTFE/FFKM
- Fluoroelastomer (FKM)
- Fluoroelastomer (FKM) - Class 6
- EPDM
- EPDM - SF
- EPDM - Class 6
- Silicone
- Perfluoroelastomer (FFKM)
- FEP Encapsulates
- Buna-N - Metal Detectable
- FKM - Metal Detectable
- EPDM - Metal Detectable
Cover & Gearcase Standard: cast iron powder coated gearcase, 17-4 stainless steel shafts, stainless steel bearing retainers Options:
- Stainless steel gearcase
- 316L stainless steel shafts
- Steel-It paint
- Lower shaft position
- Bearing Isolators
- Pedestal shims for side mounted pumps. Left hand shaft position standard.
- Right hand shaft position on side mounted gearcase
°Õ°ù³Ü-¹ó¾±³Ù® Close coupled °Õ°ù³Ü-¹ó¾±³Ù® pump mounted on stainless steel baseÌýwith stainless steel adaptors standard. Features:
- No shaft alignment necessary. No coupling guard required.
- Special base design enhances cleanability.
- Reduces overall length of complete unit by an average of 20-25%.
- Average of 20-25 gear ratios available per horsepower.
- Separate oil sump for gear reducer and timing gears.
Options:
- 304 SS polished plate base.
- NEMA or IEC frames available. Right angle reducer also available foradditional space savings.
- 1/2 through 60 horsepower drive options available.
- Horizontal or vertical porting.
Click on the links below to download pump model performance curves for Universal 2 Series Positive Displacement pumps.
- Universal 2 Series - Model 006 - Performance Curve - 95-07075 || PDF
- Universal 2 Series - Model 015 - Performance Curve - 95-07076 || PDF
-
Universal 2 Series - Model 018 - Performance Curve - 95-07077 || PDF
-
Universal 2 Series - Model 030 - Performance Curve - 95-07078 || PDF
- Universal 2 Series - Model 040 - Performance Curve - 95-07241 || PDF
- Universal 2 Series - Model 045 - Performance Curve - 95-07106 || PDF
- Universal 2 Series - Model 060 - Performance Curve - 95-07079 || PDF
- Universal 2 Series - Model 130 - Performance Curve - 95-07080 || PDF
- Universal 2 Series - Model 180 - Performance Curve - 95-07107 || PDF
- Universal 2 Series - Model 210/213 - Performance Curve - 95-07156 || PDF
- Universal 2 Series - Model 220 - Performance Curve - 95-07081 || PDF
- Universal 2 Series - Model 320 - Performance Curve - 95-07132 || PDF
- Universal 2 Series - Model 370 - Performance Curve - 95-07245 || PDF